Brac Systems Grey Water Recycling

PT Series Pressure Tanks
The Brac Systems PT Series pressure tanks are used to support the BRAC Residential and Commercial greywater pumps by providing additional water storage under pressure to meet the total demands of a system if the pump is incapable of supplying the required volumes.

The PT-60L, 80L and 100L free standing captive air, pressure tanks are all equipped with an EDPM diaphram with a 100psi maximum working pressure (tested to 150psi). Our tanks are manufactured with a tough epoxy-baked finish to ensure there is no air to water contact, for a rust-free operation. The replaceable bladder is made from synthetic rubber which will increase reliability and extend the life span. This bladder design will not permit any water to tank contact which eliminates seeping and waterlogging, and the need for air volume controls.

PT-60L - 60 litre capacity with 20 litres (5.3 US Gal) of draw-down performance over a 120 litre galvanized tank and a 1" NPT connection.

PT-80L - 80 litre capacity with 30 litres (6.6 US Gal) of draw-down performance over a 160 litre galvanized tank and a 1-1/4" NPT connection.

PT-100L - 100 litre capacity with 36 litres (9.5 US Gal) of draw-down performance over a 200 litre galvanized tank and a 1-1/4" NPT connection.

Retail Price
PT-60L CAD$ 214.00
PT-80L CAD$ 239.00
PT-100L CAD$ 275.00

Click here to calculate exchange rates.

Technical Specifications
Weight
PT-60L     12.70 kg / 27.90 lbs
PT-80L     15.00 kg / 33.00 lbs
PT-100L   18.00 kg / 39.60 lbs

Dimensions
PT-60L     Height: 58cm (23.2") Diameter: 46cm (18.4")
PT-80L     Height: 71cm (28.4") Diameter: 46cm (18.4")
PT-100L   Height: 79cm (31.6") Diameter: 46cm (18.4")